China Wholesale Discount 50×9 Durometer Squeegee - J.M. M-300 Emulsion remover for screen printing – Jiamei factory and manufacturers

Wholesale Discount 50×9 Durometer Squeegee - J.M. M-300 Emulsion remover for screen printing – Jiamei

Short Description:

Product Detail

Product Tags

Feedback (2)

To continuously increase the administration process by virtue of the rule of "sincerely, good religion and excellent are the base of company development", we commonly absorb the essence of linked goods internationally, and continually build new solutions to fulfill the requires of shoppers for Aluminium Frame , Flat Shape Squeegee , Ink Spatulas , And we are able to enable on the lookout for any products with the customers' needs. Make sure deliver the best Assistance, the most beneficial High-quality, The quickly Delivery.

Wholesale Discount 50×9 Durometer Squeegee - J.M. M-300 Emulsion remover for screen printing – Jiamei Detail:

Screen printing emulsion remover powder

Product Description

	pure	Use ratio	Remarks
J.M.H-500	50%	1:100	1 kg of defilm powder mixed with 100kg of water
J.M.M-300	30%	1:65	1 kg of defilm powder mixed with 65kg of water
J.M.N-100	15%	1:45	1 kg of defilm powder mixed with 45kg of water

Feature

Save screen mesh. /Easy to dissolve in water. / Reduced the cost for the enterprise. /Membrane cleaned off quickly and cleanly.

With little damage to the environment. / Aqueous solution can be long-term preservation. / Low Price Hot Sale Screen Printing Photo Emulsion Remover

WORKING INSTRUCTIONS

Mixing of Autostrip Powder

For general use dissolve 100 grams in 10 litres (18 pints) of cold water to make 1% strength solution. When stencils are difficult to remove use 5 litres of cold water to make a 2% strength solution. If an Automatic Stripping machine is used a 2% solution strength is preferred for a longer solution life.

Use of Autostrip Powder

1.Remove all ink residues by applying Autosolve Screen Wash to both sides of the mesh and work in with a brush.

2.Wash both sides of mesh with water to remove all solvent traces.

3.With a brush, apply Autostrip liberally to both sides of the mesh.

4.Leave to stand for 3 to 5 minutes while the emulsion coating dissolves. Do not allow Autostrip to dry onto the screen as this will make the stencil difficult to remove.

5.Wash off the stencil with a strong spray followed by a high pressure gun.

packing&shipping

Product detail pictures:

Related Product Guide:
The best Twin XL sheets you can buy for your college dorm | 100% Polyester Screen Printing
Adidas vows to use only recycled plastics by 2024 | Printing Squeegees

We have been experienced manufacturer. Wining the majority of your crucial certifications of its market for Wholesale Discount 50×9 Durometer Squeegee - J.M. M-300 Emulsion remover for screen printing – Jiamei , The product will supply to all over the world, such as: Slovenia , kazakhstan , USA , With the development of the society and economy, our company will continue the "loyalty, dedication, efficiency, innovation" spirit of enterprise, and we will always adhere to the management idea of "would rather lose gold, do not lose customers heart". We will serve the domestic and foreign businessmen with sincere dedication, and let us create bright future together with you!

Cylinder Silk Screen Printing Machine

Cylindrical Printing Machine

Mesh Screen Printing

Polyester Filter Mesh

Printing Mesh

Squeegee Scratch Board

Cooperate with you every time is very successful, very happy. Hope that we can have more cooperation!

By Jean from Holland - 2017.06.19 13:51

The company's products very well, we have purchased and cooperated many times, fair price and assured quality, in short, this is a trustworthy company!

By Rosalind from San Diego - 2018.12.25 12:43

Write your message here and send it to us