China Well-designed Polyurethane Blades - Aluminum emulsion scoop coater – Jiamei factory and manufacturers

Well-designed Polyurethane Blades - Aluminum emulsion scoop coater – Jiamei

Short Description:

Product Detail

Product Tags

Feedback (2)

"Sincerity, Innovation, Rigorousness, and Efficiency" is the persistent conception of our firm for the long-term to create jointly with consumers for mutual reciprocity and mutual reward for Handle Squeegee Ink Scraper , 23x31 Screen Printing Frames , Screen Printing Mesh Roll , Our goal is "blazing new ground, Passing Value", in the potential, we sincerely invite you to mature up with us and create a vivid foreseeable future jointly!

Well-designed Polyurethane Blades - Aluminum emulsion scoop coater – Jiamei Detail:

Product Specification

It is usually best to get an emulsion scoop coater about 2-3 inches narrower than the inside screen frame width.

14 Inch	OD18″ ×20″ screens
16 Inch	OD20″×24″ screens
18 Inch	OD 23″×31″ screens
20 Inch	OD25″×36″ screens

Product Feature

Easy and comfortable handing.

Easy to cleanup.

Holds more emulsion , Less time refilling & More screens coated,

Chemical-resistant due to its Oxidation surface.

Each side can be used in emulsion coating process with different thickness.

Included with the coater is injection molded ends with a full snap-on dust shield to prevent any particles from mixing in with your emulsion.

Size can be customized according to customer demand

HOW TO USE & CLEAN UP

FILL THE COATER: Under a safe yellow light source, pour emulsion from its container . Allow the emulsion to flow out to an even level. Make sure you have enough to coat in one stroke.

COAT THE SCREEN: Use the rounded edge of a scoop coater to apply an even coat of emulsion in one pass. The coater should be at least two inches shorter that the narrow width of your screen. Apply one coat of emulsion to the printing side, then one coat on the squeegee side. Dry the screen thoroughly.

CLEAN THE COATER: Scrape extra emulsion back into its container. Cover the container. Wash out remaining emulsion with water. Any remaining emulsion that dries in the coater can be very difficult to remove. Store the coater where the edged can’t be nicked.

Packing&Shipping

Product detail pictures:

Related Product Guide:
The 10 Best USWNT Jerseys, Shirts, Hoodies for 2019 Women’s World Cup | Flash Dryer Screen Printing
Building on Ambience | Flash Dryer Screen Printing

We emphasize advancement and introduce new products into the market each year for Well-designed Polyurethane Blades - Aluminum emulsion scoop coater – Jiamei , The product will supply to all over the world, such as: Slovenia , Turkey , Buenos Aires , we are fully determined to control the whole supply chain so as to provide quality products at competitive price in a timely manner. We are keeping up with the advanced techniques, growing through creating more values for our clients and society.

6 Color 6 Station Rotary Printing Machine

Cylinder Silk Screen Printing Machine

Make Screen Printing Frame

Polyester Fabric Mesh

Shirt Screen Printing Flash Dryer

Silkscreen Printing Frame

The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.