China Personlized ProductsScreen Printing Rubber Squeegee Blade - J.M. N-100 Emulsion remover for screen printing – Jiamei factory and manufacturers

Personlized ProductsScreen Printing Rubber Squeegee Blade - J.M. N-100 Emulsion remover for screen printing – Jiamei

Short Description:

Product Detail

Product Tags

Feedback (2)

High-quality comes 1st; assistance is foremost; business enterprise is cooperation" is our business enterprise philosophy which is constantly observed and pursued by our business for Screen Printing Polyurethane Squeegee , Pre Stretched Screen Printing Frames , Hat Screen Printing Equipment , To supply prospects with superb equipment and providers, and constantly build new machine is our company's organization objectives. We look ahead for your cooperation.

Personlized ProductsScreen Printing Rubber Squeegee Blade - J.M. N-100 Emulsion remover for screen printing – Jiamei Detail:

Screen printing emulsion remover powder

Product Description

	pure	Use ratio	Remarks
J.M.H-500	50%	1:100	1 kg of defilm powder mixed with 100kg of water
J.M.M-300	30%	1:65	1 kg of defilm powder mixed with 65kg of water
J.M.N-100	15%	1:45	1 kg of defilm powder mixed with 45kg of water

Feature

Save screen mesh. /Easy to dissolve in water. / Reduced the cost for the enterprise. /Membrane cleaned off quickly and cleanly.

With little damage to the environment. / Aqueous solution can be long-term preservation. / Low Price Hot Sale Screen Printing Photo Emulsion Remover

WORKING INSTRUCTIONS

Mixing of Autostrip Powder

For general use dissolve 100 grams in 10 litres (18 pints) of cold water to make 1% strength solution. When stencils are difficult to remove use 5 litres of cold water to make a 2% strength solution. If an Automatic Stripping machine is used a 2% solution strength is preferred for a longer solution life.

Use of Autostrip Powder

1.Remove all ink residues by applying Autosolve Screen Wash to both sides of the mesh and work in with a brush.

2.Wash both sides of mesh with water to remove all solvent traces.

3.With a brush, apply Autostrip liberally to both sides of the mesh.

4.Leave to stand for 3 to 5 minutes while the emulsion coating dissolves. Do not allow Autostrip to dry onto the screen as this will make the stencil difficult to remove.

5.Wash off the stencil with a strong spray followed by a high pressure gun.

packing&shipping

Product detail pictures:

Related Product Guide:
Harry Potter: 10 Ways To Show Off Your Love Of Hogwarts | Flash Dryer Screen Printing
How fleet management can offset cross-border delivery risks | Textile Screen Printing Conveyor Dryer

Adhering into the principle of "quality, provider, performance and growth", we now have gained trusts and praises from domestic and intercontinental consumer for Personlized ProductsScreen Printing Rubber Squeegee Blade - J.M. N-100 Emulsion remover for screen printing – Jiamei , The product will supply to all over the world, such as: British , Mauritania , Thailand , They're durable modeling and promoting well all over the world. Under no circumstances disappearing key functions in a brief time, it's a should for you personally of fantastic quality. Guided by the principle of Prudence, Efficiency, Union and Innovation. the business make an awesome efforts to expand its international trade, raise its enterprise. rofit and improve its export scale. We are confident that we'll have a vibrant prospect and to be distributed all over the world in the years to come.

Printing Frame