China Original Factory Tunnel Dryer - Emulsion remover for screen printing – Jiamei factory and manufacturers

Original Factory Tunnel Dryer - Emulsion remover for screen printing – Jiamei

Short Description:

Product Detail

Product Tags

Feedback (2)

Assume full accountability to fulfill all demands of our purchasers; attain continual advancements by marketing the advancement of our clientele; grow to be the final permanent cooperative partner of purchasers and maximize the interests of purchasers for Polyester Mesh , Aluminum Screen Printing Squeegee Handle , T-Shirt Silk Screen Printing Mesh , Warmly welcome to cooperate and develop with us! we will continue to provide product with high quality and competitive price.

Original Factory Tunnel Dryer - Emulsion remover for screen printing – Jiamei Detail:

Screen printing emulsion remover powder

Product Description

	pure	Use ratio	Remarks
J.M.H-500	50%	1:100	1 kg of defilm powder mixed with 100kg of water
J.M.M-300	30%	1:65	1 kg of defilm powder mixed with 65kg of water
J.M.N-100	15%	1:45	1 kg of defilm powder mixed with 45kg of water

Feature

Save screen mesh. /Easy to dissolve in water. / Reduced the cost for the enterprise. /Membrane cleaned off quickly and cleanly.

With little damage to the environment. / Aqueous solution can be long-term preservation. / Low Price Hot Sale Screen Printing Photo Emulsion Remover

WORKING INSTRUCTIONS

Mixing of Autostrip Powder

For general use dissolve 100 grams in 10 litres (18 pints) of cold water to make 1% strength solution. When stencils are difficult to remove use 5 litres of cold water to make a 2% strength solution. If an Automatic Stripping machine is used a 2% solution strength is preferred for a longer solution life.

Use of Autostrip Powder

1.Remove all ink residues by applying Autosolve Screen Wash to both sides of the mesh and work in with a brush.

2.Wash both sides of mesh with water to remove all solvent traces.

3.With a brush, apply Autostrip liberally to both sides of the mesh.

4.Leave to stand for 3 to 5 minutes while the emulsion coating dissolves. Do not allow Autostrip to dry onto the screen as this will make the stencil difficult to remove.

5.Wash off the stencil with a strong spray followed by a high pressure gun.

packing&shipping

Product detail pictures:

Related Product Guide:
ESMA Pavilion Is the Place to Be for Industrial Printing at FESPA 2019 | 100% Polyester Screen Printing
All-New 2019 Honda Passport Lacks Pizzazz | Flash Dryer Screen Printing

Our firm sticks on the theory of "Quality will be the life in the enterprise, and status could be the soul of it" for Original Factory Tunnel Dryer - Emulsion remover for screen printing – Jiamei , The product will supply to all over the world, such as: Lisbon , Oslo , Denver , We always insist on the management tenet of "Quality is First, Technology is Basis, Honesty and Innovation".We are able to develop new products continuously to a higher level to satisfy different needs of customers.

Bolting Cloth For Textile Printing