Original Factory 50x9mm Durometer Squeegee - Emulsion remover for screen printing – Jiamei

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Good quality comes initial; company is foremost; small business is cooperation" is our business philosophy which is frequently observed and pursued by our business for Ink Spatulas , Printing Frame , Pu Squeegee For Screen Printing , We have expanded our business into Germany, Turkey, Canada, U. S. A. , Indonesia, India, Nigeria, Brazil and some other regions of the world. We are working hard to be one of the best global suppliers.
Original Factory 50x9mm Durometer Squeegee - Emulsion remover for screen printing – Jiamei Detail:

Screen printing emulsion remover powder
未标题-1

Product Description

pure Use ratio  Remarks
J.M.H-500 50% 1:100 1 kg of defilm powder mixed with 100kg of water
J.M.M-300 30% 1:65 1 kg of defilm powder mixed with 65kg of water
J.M.N-100 15% 1:45 1 kg of defilm powder mixed with 45kg of water

Feature

Save screen mesh.   /Easy to dissolve in water.   / Reduced the cost for the enterprise.  /Membrane cleaned off quickly and cleanly.

 With little damage to the environment.  / Aqueous solution can be long-term preservation.  / Low Price Hot Sale Screen Printing Photo Emulsion Remover

未标题-2

WORKING INSTRUCTIONS

Mixing of Autostrip Powder

For general use dissolve 100 grams in 10 litres (18 pints) of cold water to make 1% strength solution. When stencils are difficult to remove use 5 litres of cold water to make a 2% strength solution. If an Automatic Stripping machine is used a 2% solution strength is preferred for a longer solution life.

Use of Autostrip Powder

1.Remove all ink residues by applying Autosolve Screen Wash to both sides of the mesh and work in with a brush.

2.Wash both sides of mesh with water to remove all solvent traces.

3.With a brush, apply Autostrip liberally to both sides of the mesh.

4.Leave to stand for 3 to 5 minutes while the emulsion coating dissolves. Do not allow Autostrip to dry onto the screen as this will make the stencil difficult to remove.

5.Wash off the stencil with a strong spray followed by a high pressure gun.

packing&shipping

1

 


Product detail pictures:

Original Factory 50x9mm Durometer Squeegee -
 Emulsion remover for screen printing  – Jiamei detail pictures


Related Product Guide:
Portage print shop owner shares art with Myers students, shows them artists can be employed, too | Education | Textile Screen Printing Conveyor Dryer
Networx: Your dryer maintenance guide – Lifestyle – GoErie.com | Printing Squeegees

We aim to find out high quality disfigurement in the generation and provide the most effective services to domestic and abroad clients wholeheartedly for Original Factory 50x9mm Durometer Squeegee - Emulsion remover for screen printing – Jiamei , The product will supply to all over the world, such as: Islamabad , Provence , Southampton , Only for accomplishing the good-quality product to meet customer's demand, all of our products have been strictly inspected before shipment. We always think about the question on the side of the customers, because you win, we win!
  • This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
    5 Stars By Tina from United Kingdom - 2017.09.16 13:44
    The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
    5 Stars By Hilda from Lesotho - 2017.04.08 14:55
    Write your message here and send it to us