China OEM/ODM Factory Single Station Screen Printing Machine - V shape aluminum emulsion scoop coater – Jiamei factory and manufacturers

OEM/ODM Factory Single Station Screen Printing Machine - V shape aluminum emulsion scoop coater – Jiamei

Short Description:

Product Detail

Product Tags

Feedback (2)

While using the "Client-Oriented" company philosophy, a demanding high-quality management method, innovative producing products and also a sturdy R&D workforce, we always deliver premium quality merchandise, superb solutions and aggressive selling prices for Bolting Cloth Printing Mesh , Aluminum Screen Printing Screens , Screen Polyester Silk Screen Mesh , Welcome buddies from all over the earth come to visit, tutorial and negotiate.

OEM/ODM Factory Single Station Screen Printing Machine - V shape aluminum emulsion scoop coater – Jiamei Detail:

Product Specification

It is usually best to get an emulsion scoop coater about 2-3 inches narrower than the inside screen frame width.

14 Inch	OD18″ ×20″ screens
16 Inch	OD20″×24″ screens
18 Inch	OD 23″×31″ screens
20 Inch	OD25″×36″ screens

Product FeatureEasy and comfortable handing.

Easy to cleanup.

Holds more emulsion , Less time refilling & More screens coated,

Chemical-resistant due to its Oxidation surface.

Each side can be used in emulsion coating process with different thickness.

Included with the coater is injection molded ends with a full snap-on dust shield to prevent any particles from mixing in with your emulsion.

Size can be customized according to customer demand

HOW TO USE & CLEAN UP

FILL THE COATER: Under a safe yellow light source, pour emulsion from its container . Allow the emulsion to flow out to an even level. Make sure you have enough to coat in one stroke.

COAT THE SCREEN: Use the rounded edge of a scoop coater to apply an even coat of emulsion in one pass. The coater should be at least two inches shorter that the narrow width of your screen. Apply one coat of emulsion to the printing side, then one coat on the squeegee side. Dry the screen thoroughly.

CLEAN THE COATER: Scrape extra emulsion back into its container. Cover the container. Wash out remaining emulsion with water. Any remaining emulsion that dries in the coater can be very difficult to remove. Store the coater where the edged can’t be nicked.

Packing&Shipping

Product detail pictures:

Related Product Guide:
Need help promoting your organization? Check out Kooziez.com | Flash Dryer Screen Printing
Stahl, HP Collaborate To Offer Sustainable Printing Solutions For Transforming Synthetic Market – Covering the Printing Inks, Coatings and Allied Industries | Textile Screen Printing Conveyor Dryer

We pursue the administration tenet of "Quality is exceptional, Assistance is supreme, Reputation is first", and will sincerely create and share success with all clients for OEM/ODM Factory Single Station Screen Printing Machine - V shape aluminum emulsion scoop coater – Jiamei , The product will supply to all over the world, such as: Jordan , Greek , Sierra Leone , We'll supply much better products with diversified designs and expert services. We sincerely welcome friends from over the world to visit our company and cooperate with us on the basis of long-term and mutual benefits.

Aluminum Silk Screen Frame

Flash Cure Units

Rubber Cutting Blade

Screen Printing Squeegee

Silkscreen Printing Mesh

T Shirt Printing Machine

The company has a good reputation in this industry, and finally it tured out that choose them is a good choice.

By Austin Helman from Russia - 2017.07.28 15:46

We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.

By Mike from Palestine - 2017.09.22 11:32

Write your message here and send it to us