The Screen Printing of curved objects may be in which industry, but no matter which industry’s printing of any shape is screen printing mesh it can be printed. The regular products of screen printing meshs are incapable and low in cost. It is more cost effective to use a lot of purchases. Screen printing meshs are often limited in terms of conditions for simple surface printing or printing. This is a very effective measure.

1. According to the substrate, different printing materials are used for blending. First, use the plate and the plate to mix the required ink. Then, one person holds the live screen plate with one hand, and the packaged part is tightly attached to the substrate surface, and the other person uses the doctor blade evenly on the ink adjustment plate. The ink is placed on one side of the squeegee, and then the squeegee is placed on the stencil for uniform squeegee.

Screen Printing Mesh

2. Dry and repair the sensitive text graphic version first, then remove it and cut it according to the size. At the two ends of the screen, wood chips or aluminum sheets are used as the skeleton to be firmly adhered with an adhesive tape. It can also be directly bonded with viscose. This will produce the desired screen version of the mask.

3. If the area of ​​the printed graphic is too large, the ink may be poured on the plate according to the situation, but do not let the ink flow out of the substrate. Note that the blended ink should not be too thin, not too dry, moderate dry and wet as well. Small area printing and printing can be operated by one person by attaching one end of the back plate to the desired position on the substrate surface with the packaging tape, and then pressing the printing plate on the substrate with another hand. print.

Fourth, the starting plate must be pressed according to the direction of the lower end of the tape. If it is operated by 2 people. Printing by this method has the advantages of convenient operation, flexible requirements on the substrate, and large and small size. The quantity can be more or less, and it can be said that it is low in cost and saves its own input cost.