China Newly ArrivalScreen Printing Aluminum Squeegee Blade - J.M. N-100 Emulsion remover for screen printing – Jiamei factory and manufacturers

Newly ArrivalScreen Printing Aluminum Squeegee Blade - J.M. N-100 Emulsion remover for screen printing – Jiamei

Short Description:

Product Detail

Product Tags

Feedback (2)

We insist over the principle of enhancement of 'High high quality, Efficiency, Sincerity and Down-to-earth working approach' to offer you with superb assistance of processing for Uv Inks Squeegee Rubber Blade , Cylinder Silk Screen Printing Machine , Screen Printing Flash Dryer , If you have the requirement for any of our products, please contact us now. We are looking forward to hearing from you soon.

Newly ArrivalScreen Printing Aluminum Squeegee Blade - J.M. N-100 Emulsion remover for screen printing – Jiamei Detail:

Screen printing emulsion remover powder

Product Description

	pure	Use ratio	Remarks
J.M.H-500	50%	1:100	1 kg of defilm powder mixed with 100kg of water
J.M.M-300	30%	1:65	1 kg of defilm powder mixed with 65kg of water
J.M.N-100	15%	1:45	1 kg of defilm powder mixed with 45kg of water

Feature

Save screen mesh. /Easy to dissolve in water. / Reduced the cost for the enterprise. /Membrane cleaned off quickly and cleanly.

With little damage to the environment. / Aqueous solution can be long-term preservation. / Low Price Hot Sale Screen Printing Photo Emulsion Remover

WORKING INSTRUCTIONS

Mixing of Autostrip Powder

For general use dissolve 100 grams in 10 litres (18 pints) of cold water to make 1% strength solution. When stencils are difficult to remove use 5 litres of cold water to make a 2% strength solution. If an Automatic Stripping machine is used a 2% solution strength is preferred for a longer solution life.

Use of Autostrip Powder

1.Remove all ink residues by applying Autosolve Screen Wash to both sides of the mesh and work in with a brush.

2.Wash both sides of mesh with water to remove all solvent traces.

3.With a brush, apply Autostrip liberally to both sides of the mesh.

4.Leave to stand for 3 to 5 minutes while the emulsion coating dissolves. Do not allow Autostrip to dry onto the screen as this will make the stencil difficult to remove.

5.Wash off the stencil with a strong spray followed by a high pressure gun.

packing&shipping

Product detail pictures:

Related Product Guide:
Linden Vleihuis: Reintroducing Biodiversity into Urban Living | Textile Screen Printing Conveyor Dryer
Laundry Robot Firm, er, Folds | Printing Squeegees

We are also focusing on enhancing the things administration and QC program in order that we could keep fantastic advantage within the fiercely-competitive enterprise for Newly ArrivalScreen Printing Aluminum Squeegee Blade - J.M. N-100 Emulsion remover for screen printing – Jiamei , The product will supply to all over the world, such as: Maldives , Bangkok , Bolivia , Based on products with high quality, competitive price, and our full range service, we have accumulated professional strength and experience, and we have built up a very good reputation in the field. Along with the continuous development, we commit ourselves not only to the Chinese domestic business but also the international market. May you moved by our high quality products and passionate service. Let's open a new chapter of mutual benefit and double win.

Printing Frame With Mesh

Printing Mesh For Textile Screen Printing

Screen Printing Frame

Screen Printing Mesh For T-Shirt

Silk Screening Printing Fabric

Triple Duro Squeegee

As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!