China Manufacturer ofMonofilament Polyester Printing Mesh - V shape aluminum emulsion scoop coater – Jiamei factory and manufacturers

Manufacturer ofMonofilament Polyester Printing Mesh - V shape aluminum emulsion scoop coater – Jiamei

Short Description:

Product Detail

Product Tags

Feedback (2)

We take pleasure in an extremely fantastic standing among the our prospects for our great product top quality, competitive cost and the finest support for Polyurethane Squeegee Scraper Blade , Manual Silk Screen Printing Machine Printer , Screen Squeegee , Our Enterprise Core Principle: The prestige 1st ;The quality guarantee ;The customer are supreme.

Manufacturer ofMonofilament Polyester Printing Mesh - V shape aluminum emulsion scoop coater – Jiamei Detail:

Product Specification

It is usually best to get an emulsion scoop coater about 2-3 inches narrower than the inside screen frame width.

14 Inch	OD18″ ×20″ screens
16 Inch	OD20″×24″ screens
18 Inch	OD 23″×31″ screens
20 Inch	OD25″×36″ screens

Product FeatureEasy and comfortable handing.

Easy to cleanup.

Holds more emulsion , Less time refilling & More screens coated,

Chemical-resistant due to its Oxidation surface.

Each side can be used in emulsion coating process with different thickness.

Included with the coater is injection molded ends with a full snap-on dust shield to prevent any particles from mixing in with your emulsion.

Size can be customized according to customer demand

HOW TO USE & CLEAN UP

FILL THE COATER: Under a safe yellow light source, pour emulsion from its container . Allow the emulsion to flow out to an even level. Make sure you have enough to coat in one stroke.

COAT THE SCREEN: Use the rounded edge of a scoop coater to apply an even coat of emulsion in one pass. The coater should be at least two inches shorter that the narrow width of your screen. Apply one coat of emulsion to the printing side, then one coat on the squeegee side. Dry the screen thoroughly.

CLEAN THE COATER: Scrape extra emulsion back into its container. Cover the container. Wash out remaining emulsion with water. Any remaining emulsion that dries in the coater can be very difficult to remove. Store the coater where the edged can’t be nicked.

Packing&Shipping

Product detail pictures:

Related Product Guide:
ITMA 2015 Technology: Wet Processing | Bolting Cloth For Screen Printing
When David Bowie Launched His Own Internet Service Provider | 100% Polyester Screen Printing

We also offer product sourcing and flight consolidation services. We have our own factory and sourcing office. We can provide you with almost every type of product related to our product range for Manufacturer ofMonofilament Polyester Printing Mesh - V shape aluminum emulsion scoop coater – Jiamei , The product will supply to all over the world, such as: Iraq , Australia , Adelaide , We confirm to public, cooperation, win-win situation as our principle, adhere to the philosophy of make a living by quality, keep developing by honesty , sincerely hope to build up a good relationship with more and more customers and friends, to achieve a win-win situation and common prosperity.

Mesh Aluminum Frame