Manufacturer ofMonofilament Polyester Printing Mesh - Aluminum emulsion scoop coater – Jiamei

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

With our leading technology at the same time as our spirit of innovation,mutual cooperation, benefits and growth, we're going to build a prosperous future together with your esteemed firm for Screen Mesh For Printing , Manual Cylindrical Screen Printing Machine , Cylinder Silk Screen Printing Machine , Adhering to the business enterprise philosophy of 'customer first, forge ahead', we sincerely welcome consumers from at your home and abroad to cooperate with us provide you greatest services!
Manufacturer ofMonofilament Polyester Printing Mesh - Aluminum emulsion scoop coater – Jiamei Detail:

Aluminum emulsion scoop coater

Emulsion scoop coater is a necessary tool for coating screens with all direct liquid emulsions.
made of durable aluminum alloy with plastic end cap guides, it will give you a nice even coat when applied with this emulsion scoop coater. Designed for easy grip, application, and cleanup.
Also easy to hold, sit easily on flat surface between coats
Aluminum emulsion scoop coater,used for load and scrap emulsion,Large capacity design to ensure more emulsion can be loaded.Can be used for wide frame and precision printing.
V shape aluminum emulsion scoop coater,a total new design,more emulsion can be loaded, good handling,easy to operation,can be used both two side.
a sharp edge for thin coats on higher mesh screens, and a rounded dull edge for coating lower mesh screens or for coating heat transfers. They hold a good amount of emulsion for lengthy coating sessions.    
Choose the right Size :
It is usually best to get an emulsion scoop coater about 2-3 inches narrower than the inside screen frame width.
14 Inch –OD18″ ×20″ screens.
16 Inch –OD20″×24″ screens .
18 Inch –OD 23″×31″ screens.
20 Inch –OD25″×36″ screens.
Feature:

  1. Easy and comfortable handing.
  2. Easy to cleanup.
  3. Holds more emulsion , Less time refilling & More screens coated,

4. Chemical-resistant due to its Oxidation surface.
5.Each side can be used in emulsion coating process with different thickness.
6.Included with the coater is injection molded ends with a full snap-on dust shield to prevent any particles from mixing in with your emulsion.
7.Size can be customized according to customer demand  

HOW TO USE & CLEAN UP:

FILL THE COATER: Under a safe yellow light source, pour emulsion from its container . Allow the emulsion to flow out to an even level. Make sure you have enough to coat in one stroke.
COAT THE SCREEN: Use the rounded edge of a scoop coater to apply an even coat of emulsion in one pass. The coater should be at least two inches shorter that the narrow width of your screen. Apply one coat of emulsion to the printing side, then one coat on the squeegee side. Dry the screen thoroughly.
CLEAN THE COATER: 
Scrape extra emulsion back into its container. Cover the container. Wash out remaining emulsion with water. Any remaining emulsion that dries in the coater can be very difficult to remove. Store the coater where the edged can’t be nicked.

Application:

图片2


Product detail pictures:

Manufacturer ofMonofilament Polyester Printing Mesh -
 Aluminum emulsion scoop coater – Jiamei detail pictures

Manufacturer ofMonofilament Polyester Printing Mesh -
 Aluminum emulsion scoop coater – Jiamei detail pictures

Manufacturer ofMonofilament Polyester Printing Mesh -
 Aluminum emulsion scoop coater – Jiamei detail pictures

Manufacturer ofMonofilament Polyester Printing Mesh -
 Aluminum emulsion scoop coater – Jiamei detail pictures

Manufacturer ofMonofilament Polyester Printing Mesh -
 Aluminum emulsion scoop coater – Jiamei detail pictures


Related Product Guide:
Laundry Robot Firm, er, Folds | Bolting Cloth For Screen Printing
Best workout presents to buy in 2019 – workout presents buying guide | Flash Dryer Screen Printing

Our pursuit and company intention is usually to "Always fulfill our purchaser requirements". We go on to acquire and layout excellent high quality products for both our previous and new consumers and realize a win-win prospect for our customers too as us for Manufacturer ofMonofilament Polyester Printing Mesh - Aluminum emulsion scoop coater – Jiamei , The product will supply to all over the world, such as: Libya , New Orleans , Luxemburg , With the first-class products, excellent service, fast delivery and the best price, we have won highly praise foreign customers'. Our products have been exported to Africa, the Middle East, Southeast Asia and other regions.
  • High Quality, High Efficiency, Creative and Integrity, worth having long-term cooperation! Looking forward to the future cooperation!
    5 Stars By Sandy from Albania - 2017.04.08 14:55
    On this website, product categories is clear and rich, I can find the product I want very quickly and easily, this is really very good!
    5 Stars By Eric from Mexico - 2018.06.21 17:11
    Write your message here and send it to us