Hot New Products Screen Printed Fabric - Aluminum emulsion scoop coater – Jiamei

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We also offer product sourcing and flight consolidation services. We have our own factory and sourcing office. We can provide you with almost every type of product related to our product range for Bolting Cloth Printing Mesh , Screen Printing Squeegee Rubber 50x9mm , Felt Squeegee Screen Printing , Teamwork is encouraged at all levels with regular campaigns. Our research group experiments on various developments during the industry for improvement within the solutions.
Hot New Products Screen Printed Fabric - Aluminum emulsion scoop coater – Jiamei Detail:

Aluminum emulsion scoop coater

Emulsion scoop coater is a necessary tool for coating screens with all direct liquid emulsions.
made of durable aluminum alloy with plastic end cap guides, it will give you a nice even coat when applied with this emulsion scoop coater. Designed for easy grip, application, and cleanup.
Also easy to hold, sit easily on flat surface between coats
Aluminum emulsion scoop coater,used for load and scrap emulsion,Large capacity design to ensure more emulsion can be loaded.Can be used for wide frame and precision printing.
V shape aluminum emulsion scoop coater,a total new design,more emulsion can be loaded, good handling,easy to operation,can be used both two side.
a sharp edge for thin coats on higher mesh screens, and a rounded dull edge for coating lower mesh screens or for coating heat transfers. They hold a good amount of emulsion for lengthy coating sessions.    
Choose the right Size :
It is usually best to get an emulsion scoop coater about 2-3 inches narrower than the inside screen frame width.
14 Inch –OD18″ ×20″ screens.
16 Inch –OD20″×24″ screens .
18 Inch –OD 23″×31″ screens.
20 Inch –OD25″×36″ screens.
Feature:

  1. Easy and comfortable handing.
  2. Easy to cleanup.
  3. Holds more emulsion , Less time refilling & More screens coated,

4. Chemical-resistant due to its Oxidation surface.
5.Each side can be used in emulsion coating process with different thickness.
6.Included with the coater is injection molded ends with a full snap-on dust shield to prevent any particles from mixing in with your emulsion.
7.Size can be customized according to customer demand  

HOW TO USE & CLEAN UP:

FILL THE COATER: Under a safe yellow light source, pour emulsion from its container . Allow the emulsion to flow out to an even level. Make sure you have enough to coat in one stroke.
COAT THE SCREEN: Use the rounded edge of a scoop coater to apply an even coat of emulsion in one pass. The coater should be at least two inches shorter that the narrow width of your screen. Apply one coat of emulsion to the printing side, then one coat on the squeegee side. Dry the screen thoroughly.
CLEAN THE COATER: 
Scrape extra emulsion back into its container. Cover the container. Wash out remaining emulsion with water. Any remaining emulsion that dries in the coater can be very difficult to remove. Store the coater where the edged can’t be nicked.

Application:

图片2


Product detail pictures:

Hot New Products Screen Printed Fabric -
 Aluminum emulsion scoop coater – Jiamei detail pictures

Hot New Products Screen Printed Fabric -
 Aluminum emulsion scoop coater – Jiamei detail pictures

Hot New Products Screen Printed Fabric -
 Aluminum emulsion scoop coater – Jiamei detail pictures

Hot New Products Screen Printed Fabric -
 Aluminum emulsion scoop coater – Jiamei detail pictures

Hot New Products Screen Printed Fabric -
 Aluminum emulsion scoop coater – Jiamei detail pictures


Related Product Guide:
2020 Kia Telluride Ready to Meet Family Needs | Flash Dryer Screen Printing
The 20 Best DVDs and Blu-rays of 2015 | Bolting Cloth For Screen Printing

Our firm sticks on the theory of "Quality will be the life in the enterprise, and status could be the soul of it" for Hot New Products Screen Printed Fabric - Aluminum emulsion scoop coater – Jiamei , The product will supply to all over the world, such as: Ukraine , Malaysia , UK , We always insist on the management tenet of "Quality is First, Technology is Basis, Honesty and Innovation".We are able to develop new products continuously to a higher level to satisfy different needs of customers.
  • It is a very good, very rare business partners, looking forward to the next more perfect cooperation!
    5 Stars By Zoe from Bolivia - 2018.09.29 17:23
    The company can keep up with the changes in this industry market, product updates fast and the price is cheap, this is our second cooperation, it's good.
    5 Stars By Amy from kazakhstan - 2018.07.26 16:51
    Write your message here and send it to us