High Quality for Single Color 1 Station - Aluminum emulsion scoop coater – Jiamei

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Persisting in "High quality, Prompt Delivery, Aggressive Price", now we have established long-term cooperation with consumers from equally overseas and domestically and get new and old clients' large comments for Squeegee For Screen Printing , Large Screen Printing Frame , T Shirt Screen Printing Machine , Together with our efforts, our products have won the trust of customers and been very salable both here and abroad.
High Quality for Single Color 1 Station - Aluminum emulsion scoop coater – Jiamei Detail:

Emulsion scoop coater is a necessary tool for coating screens with all direct liquid emulsions.

made of durable aluminum alloy with plastic end cap guides, it will give you a nice even coat when applied with this emulsion scoop coater. Designed for easy grip, application, and cleanup.

Also easy to hold, sit easily on flat surface between coats

 

 

Aluminum emulsion scoop coater,used for load and scrap emulsion,Large capacity design to ensure more emulsion can be loaded.Can be used for wide frame and precision printing.

 

V shape aluminum emulsion scoop coater,a total new design,more emulsion can be loaded, good handling,easy to operation,can be used both two side.

 

a sharp edge for thin coats on higher mesh screens, and a rounded dull edge for coating lower mesh screens or for coating heat transfers. They hold a good amount of emulsion for lengthy coating sessions.    

 

 

Choose the right Size :

It is usually best to get an emulsion scoop coater about 2-3 inches narrower than the inside screen frame width.

 

14 Inch –OD18″ ×20″ screens.

16 Inch –OD20″×24″ screens .

18 Inch –OD 23″×31″ screens.

20 Inch –OD25″×36″ screens.

 

Feature:

  1. Easy and comfortable handing.
  2. Easy to cleanup.
  3. Holds more emulsion , Less time refilling & More screens coated,

4. Chemical-resistant due to its Oxidation surface.

5.Each side can be used in emulsion coating process with different thickness.

6.Included with the coater is injection molded ends with a full snap-on dust shield to prevent any particles from mixing in with your emulsion.

7.Size can be customized according to customer demand  

 

HOW TO USE & CLEAN UP:

FILL THE COATER: Under a safe yellow light source, pour emulsion from its container . Allow the emulsion to flow out to an even level. Make sure you have enough to coat in one stroke.

COAT THE SCREEN: Use the rounded edge of a scoop coater to apply an even coat of emulsion in one pass. The coater should be at least two inches shorter that the narrow width of your screen. Apply one coat of emulsion to the printing side, then one coat on the squeegee side. Dry the screen thoroughly.

CLEAN THE COATER: 

Scrape extra emulsion back into its container. Cover the container. Wash out remaining emulsion with water. Any remaining emulsion that dries in the coater can be very difficult to remove. Store the coater where the edged can’t be nicked.

 

Application:

OLZ9)%XN$833%NA[F_G$YQW


Product detail pictures:

High Quality for Single Color 1 Station -
 Aluminum emulsion scoop coater – Jiamei detail pictures

High Quality for Single Color 1 Station -
 Aluminum emulsion scoop coater – Jiamei detail pictures

High Quality for Single Color 1 Station -
 Aluminum emulsion scoop coater – Jiamei detail pictures

High Quality for Single Color 1 Station -
 Aluminum emulsion scoop coater – Jiamei detail pictures

High Quality for Single Color 1 Station -
 Aluminum emulsion scoop coater – Jiamei detail pictures

High Quality for Single Color 1 Station -
 Aluminum emulsion scoop coater – Jiamei detail pictures


Related Product Guide:
All-New 2019 Ford Ranger First Drive Review | Bolting Cloth For Screen Printing
2019 Rockstar Energy Husqvarna Factory Apparel Available Soon | Textile Screen Printing Conveyor Dryer

So as to provide you with ease and enlarge our business, we even have inspectors in QC Crew and guarantee you our best company and solution for High Quality for Single Color 1 Station - Aluminum emulsion scoop coater – Jiamei , The product will supply to all over the world, such as: Australia , Anguilla , Muscat , Customer satisfaction is our first goal. Our mission is to pursue the superlative quality, making continual progress. We sincerely welcome you to make progress hand in hand with us, and construct a prosperous future together.
  • Sales manager is very enthusiastic and professional, gave us a great concessions and product quality is very good,thank you very much!
    5 Stars By Anastasia from Slovenia - 2018.11.28 16:25
    The company can keep up with the changes in this industry market, product updates fast and the price is cheap, this is our second cooperation, it's good.
    5 Stars By Mabel from Croatia - 2017.10.13 10:47
    Write your message here and send it to us