China High Quality for Pu Squeegee Rubber - Aluminum emulsion scoop coater – Jiamei factory and manufacturers

High Quality for Pu Squeegee Rubber - Aluminum emulsion scoop coater – Jiamei

Short Description:

Product Detail

Product Tags

Feedback (2)

As for competitive charges, we believe that you will be searching far and wide for anything that can beat us. We will state with absolute certainty that for such excellent at such charges we have been the lowest around for Polyurethane Scraper , Aluminum Screen Printing Frame , Screen Polyester Mesh , We're going to endeavor to maintain our fantastic track record as the very best products supplier in the planet. When you've got any questions or reviews, you should get in touch with with us freely.

High Quality for Pu Squeegee Rubber - Aluminum emulsion scoop coater – Jiamei Detail:

Product Specification

It is usually best to get an emulsion scoop coater about 2-3 inches narrower than the inside screen frame width.

14 Inch	OD18″ ×20″ screens
16 Inch	OD20″×24″ screens
18 Inch	OD 23″×31″ screens
20 Inch	OD25″×36″ screens

Product Feature

Easy and comfortable handing.

Easy to cleanup.

Holds more emulsion , Less time refilling & More screens coated,

Chemical-resistant due to its Oxidation surface.

Each side can be used in emulsion coating process with different thickness.

Included with the coater is injection molded ends with a full snap-on dust shield to prevent any particles from mixing in with your emulsion.

Size can be customized according to customer demand

HOW TO USE & CLEAN UP

FILL THE COATER: Under a safe yellow light source, pour emulsion from its container . Allow the emulsion to flow out to an even level. Make sure you have enough to coat in one stroke.

COAT THE SCREEN: Use the rounded edge of a scoop coater to apply an even coat of emulsion in one pass. The coater should be at least two inches shorter that the narrow width of your screen. Apply one coat of emulsion to the printing side, then one coat on the squeegee side. Dry the screen thoroughly.

CLEAN THE COATER: Scrape extra emulsion back into its container. Cover the container. Wash out remaining emulsion with water. Any remaining emulsion that dries in the coater can be very difficult to remove. Store the coater where the edged can’t be nicked.

Packing&Shipping

Product detail pictures:

Related Product Guide:
Ricoh enters DTG market and bags first sale | Flash Dryer Screen Printing
It’s Easy Being Green With Patagonia’s Responsibili-Tees | Printing Squeegees

To create much more benefit for consumers is our company philosophy; customer growing is our working chase for High Quality for Pu Squeegee Rubber - Aluminum emulsion scoop coater – Jiamei , The product will supply to all over the world, such as: Los Angeles , Boston , Lahore , Our company is working by the operation principle of "integrity-based, cooperation created, people oriented, win-win cooperation". We hope we can have a friendly relationship with businessman from all over the world

Flags Polyester Fabric

Polyester Bolting Cloth

Printing Frame

Printing Squeegee

Squeegee Rubber

T Shirt Screen Printing

We have been cooperated with this company for many years, the company always ensure timely delivery ,good quality and correct number, we are good partners.