China Factory wholesale Stock Printing Screen Fabric - Stainless steel emulsion scoop coater – Jiamei factory and manufacturers

Factory wholesale Stock Printing Screen Fabric - Stainless steel emulsion scoop coater – Jiamei

Short Description:

Product Detail

Product Tags

Feedback (2)

We have now our possess revenue group, design staff, technical crew, QC team and package group. We now have strict excellent regulate procedures for each process. Also, all of our workers are experienced in printing subject for Screen Frame Rack , Screen Printing Flash Dryer , Screen Frame , Since establishment within the early 1990s, now we have arrange our sale network in USA, Germany, Asia, and several Middle Eastern countries. We intention to get a top class supplier for worldwide OEM and aftermarket!

Factory wholesale Stock Printing Screen Fabric - Stainless steel emulsion scoop coater – Jiamei Detail:

Product Specification

It is usually best to get an emulsion scoop coater about 2-3 inches narrower than the inside screen frame width.

14 Inch	OD18″ ×20″ screens
16 Inch	OD20″×24″ screens
18 Inch	OD 23″×31″ screens
20 Inch	OD25″×36″ screens

Product Feature

Easy and comfortable handing.

Easy to cleanup.

Holds more emulsion , Less time refilling & More screens coated,

Chemical-resistant due to its Oxidation surface.

Each side can be used in emulsion coating process with different thickness.

Included with the coater is injection molded ends with a full snap-on dust shield to prevent any particles from mixing in with your emulsion.

Size can be customized according to customer demand

HOW TO USE & CLEAN UP

FILL THE COATER: Under a safe yellow light source, pour emulsion from its container . Allow the emulsion to flow out to an even level. Make sure you have enough to coat in one stroke.

COAT THE SCREEN: Use the rounded edge of a scoop coater to apply an even coat of emulsion in one pass. The coater should be at least two inches shorter that the narrow width of your screen. Apply one coat of emulsion to the printing side, then one coat on the squeegee side. Dry the screen thoroughly.

CLEAN THE COATER: Scrape extra emulsion back into its container. Cover the container. Wash out remaining emulsion with water. Any remaining emulsion that dries in the coater can be very difficult to remove. Store the coater where the edged can’t be nicked.

Packing&Shipping

Product detail pictures:

Related Product Guide:
From Sexy Air Purifiers To Hide-And-Seek Stores, Here’s What’s Changing Shopping In 2019 | 100% Polyester Screen Printing
Best throw blanket to buy in 2019 – throw blanket Reviews | 100% Polyester Screen Printing

We believe in: Innovation is our soul and spirit. Quality is our life. Shopper need is our God for Factory wholesale Stock Printing Screen Fabric - Stainless steel emulsion scoop coater – Jiamei , The product will supply to all over the world, such as: Algeria , Eindhoven , Lesotho , Our company now has many department, and there have more than 20 employees in our company. We set up sales shop, show room, and product warehouse. In the meantime, we registered our own brand. We have tightened inspection for quality of product.

Aluminum Frames For Screen Printing

Manual Silk Screen Printer

Screen Printing Mesh Roll

Screen Printing Squeegee

Single Color Screen Printing Machine

T-Shirt Screen Printing Mesh

We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.

By Grace from Italy - 2017.06.22 12:49

The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.

By Amy from St. Petersburg - 2018.02.21 12:14

Write your message here and send it to us