China Factory wholesale Silk Screen Print Frame With Mesh - Stainless steel emulsion scoop coater – Jiamei factory and manufacturers

Factory wholesale Silk Screen Print Frame With Mesh - Stainless steel emulsion scoop coater – Jiamei

Short Description:

Product Detail

Product Tags

Feedback (2)

With our loaded encounter and considerate services, we have now been recognized as a trustworthy supplier for lots of worldwide consumers for Manual Micro Registration Screen Printing Machine , Printing Equipment , Led Exposure Unit , We are not satisfied with the present achievements but we are trying best to innovate to meet buyer's more personalized needs. No matter where you are from, we are here to wait for your kind request, and welcom to visit our factory. Choose us, you can meet your reliable supplier.

Factory wholesale Silk Screen Print Frame With Mesh - Stainless steel emulsion scoop coater – Jiamei Detail:

Product Specification

It is usually best to get an emulsion scoop coater about 2-3 inches narrower than the inside screen frame width.

14 Inch	OD18″ ×20″ screens
16 Inch	OD20″×24″ screens
18 Inch	OD 23″×31″ screens
20 Inch	OD25″×36″ screens

Product Feature

Easy and comfortable handing.

Easy to cleanup.

Holds more emulsion , Less time refilling & More screens coated,

Chemical-resistant due to its Oxidation surface.

Each side can be used in emulsion coating process with different thickness.

Included with the coater is injection molded ends with a full snap-on dust shield to prevent any particles from mixing in with your emulsion.

Size can be customized according to customer demand

HOW TO USE & CLEAN UP

FILL THE COATER: Under a safe yellow light source, pour emulsion from its container . Allow the emulsion to flow out to an even level. Make sure you have enough to coat in one stroke.

COAT THE SCREEN: Use the rounded edge of a scoop coater to apply an even coat of emulsion in one pass. The coater should be at least two inches shorter that the narrow width of your screen. Apply one coat of emulsion to the printing side, then one coat on the squeegee side. Dry the screen thoroughly.

CLEAN THE COATER: Scrape extra emulsion back into its container. Cover the container. Wash out remaining emulsion with water. Any remaining emulsion that dries in the coater can be very difficult to remove. Store the coater where the edged can’t be nicked.

Packing&Shipping

Product detail pictures:

Related Product Guide:
A Sense of Place: Ellen Phelans Kenjockety | 100% Polyester Screen Printing
2019 Hyundai Kona EV Electric Car Review | 100% Polyester Screen Printing

The key to our success is "Good Product Quality, Reasonable Price and Efficient Service" for Factory wholesale Silk Screen Print Frame With Mesh - Stainless steel emulsion scoop coater – Jiamei , The product will supply to all over the world, such as: Malawi , Bangalore , Qatar , Our company always concentrate on the development of the international market. We have a lot of customers in Russia , European countries, the USA, the Middle East countries and Africa countries. We always follow that quality is foundation while service is guarantee to meet all customers.

50x7mm Squeegee Rubber Blade

Aluminum Screen Printing Squeegee Handle

Manual Round Screen Printing Machine

Polyester Silk Screen Mesh

Rubber Squeegee

Sport Mesh Fabric

This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.