Factory supplied Screen Print Press - Aluminum emulsion scoop coater – Jiamei

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

The key to our success is "Good Product Excellent, Reasonable Rate and Efficient Service" for Screen Mesh For Printing , Squeegee For Screen Printing , Screen Printing Belt Dryer , With the eternal goal of "continuous quality improvement, customer satisfaction", we are sure that our product quality is stable and reliable and our products are best-selling at home and abroad.
Factory supplied Screen Print Press - Aluminum emulsion scoop coater – Jiamei Detail:

Emulsion scoop coater is a necessary tool for coating screens with all direct liquid emulsions.

made of durable aluminum alloy with plastic end cap guides, it will give you a nice even coat when applied with this emulsion scoop coater. Designed for easy grip, application, and cleanup.

Also easy to hold, sit easily on flat surface between coats

 

 

Aluminum emulsion scoop coater,used for load and scrap emulsion,Large capacity design to ensure more emulsion can be loaded.Can be used for wide frame and precision printing.

 

V shape aluminum emulsion scoop coater,a total new design,more emulsion can be loaded, good handling,easy to operation,can be used both two side.

 

a sharp edge for thin coats on higher mesh screens, and a rounded dull edge for coating lower mesh screens or for coating heat transfers. They hold a good amount of emulsion for lengthy coating sessions.    

 

 

Choose the right Size :

It is usually best to get an emulsion scoop coater about 2-3 inches narrower than the inside screen frame width.

 

14 Inch –OD18″ ×20″ screens.

16 Inch –OD20″×24″ screens .

18 Inch –OD 23″×31″ screens.

20 Inch –OD25″×36″ screens.

 

Feature:

  1. Easy and comfortable handing.
  2. Easy to cleanup.
  3. Holds more emulsion , Less time refilling & More screens coated,

4. Chemical-resistant due to its Oxidation surface.

5.Each side can be used in emulsion coating process with different thickness.

6.Included with the coater is injection molded ends with a full snap-on dust shield to prevent any particles from mixing in with your emulsion.

7.Size can be customized according to customer demand  

 

HOW TO USE & CLEAN UP:

FILL THE COATER: Under a safe yellow light source, pour emulsion from its container . Allow the emulsion to flow out to an even level. Make sure you have enough to coat in one stroke.

COAT THE SCREEN: Use the rounded edge of a scoop coater to apply an even coat of emulsion in one pass. The coater should be at least two inches shorter that the narrow width of your screen. Apply one coat of emulsion to the printing side, then one coat on the squeegee side. Dry the screen thoroughly.

CLEAN THE COATER: 

Scrape extra emulsion back into its container. Cover the container. Wash out remaining emulsion with water. Any remaining emulsion that dries in the coater can be very difficult to remove. Store the coater where the edged can’t be nicked.

 

Application:

OLZ9)%XN$833%NA[F_G$YQW


Product detail pictures:

Factory supplied Screen Print Press -
 Aluminum emulsion scoop coater – Jiamei detail pictures

Factory supplied Screen Print Press -
 Aluminum emulsion scoop coater – Jiamei detail pictures

Factory supplied Screen Print Press -
 Aluminum emulsion scoop coater – Jiamei detail pictures

Factory supplied Screen Print Press -
 Aluminum emulsion scoop coater – Jiamei detail pictures

Factory supplied Screen Print Press -
 Aluminum emulsion scoop coater – Jiamei detail pictures

Factory supplied Screen Print Press -
 Aluminum emulsion scoop coater – Jiamei detail pictures


Related Product Guide:
Building on Ambience | Bolting Cloth For Screen Printing
Best optimal fitness definition to buy in 2019 – optimal fitness definition buying guide | Flash Dryer Screen Printing

With our leading technology at the same time as our spirit of innovation,mutual cooperation, benefits and development, we are going to build a prosperous future alongside one another with your esteemed enterprise for Factory supplied Screen Print Press - Aluminum emulsion scoop coater – Jiamei , The product will supply to all over the world, such as: Detroit , Victoria , Brunei , Now, we are trying to enter new markets where we do not have a presence and developing the markets we have the already penetrated. On account of superior quality and competitive price , we will be the market leader, please don’t hesitate to contact us by phone or email, if you are interested in any of our products.
  • We feel easy to cooperate with this company, the supplier is very responsible, thanks.There will be more in-depth cooperation.
    5 Stars By Anastasia from Kenya - 2018.05.22 12:13
    With a positive attitude of "regard the market, regard the custom, regard the science", the company works actively to do research and development. Hope we have a future business relationships and achieving mutual success.
    5 Stars By David from New York - 2017.10.27 12:12
    Write your message here and send it to us