China Factory Free sample Conveyor Dryer For T Shirts - Emulsion remover for screen printing – Jiamei factory and manufacturers

Factory Free sample Conveyor Dryer For T Shirts - Emulsion remover for screen printing – Jiamei

Short Description:

Product Detail

Product Tags

Feedback (2)

We retain bettering and perfecting our goods and service. At the same time, we perform actively to do research and enhancement for Cylinder Silk Screen Printing Machine , Screen Printing Machine , Squeegee For Screen Printing , We sincerely welcome domestic and foreign merchants who calls, letters asking, or to plants to negotiate, we will offer you quality products and the most enthusiastic service,We look forward to your visit and your cooperation.

Factory Free sample Conveyor Dryer For T Shirts - Emulsion remover for screen printing – Jiamei Detail:

Screen printing emulsion remover powder

Product Description

	pure	Use ratio	Remarks
J.M.H-500	50%	1:100	1 kg of defilm powder mixed with 100kg of water
J.M.M-300	30%	1:65	1 kg of defilm powder mixed with 65kg of water
J.M.N-100	15%	1:45	1 kg of defilm powder mixed with 45kg of water

Feature

Save screen mesh. /Easy to dissolve in water. / Reduced the cost for the enterprise. /Membrane cleaned off quickly and cleanly.

With little damage to the environment. / Aqueous solution can be long-term preservation. / Low Price Hot Sale Screen Printing Photo Emulsion Remover

WORKING INSTRUCTIONS

Mixing of Autostrip Powder

For general use dissolve 100 grams in 10 litres (18 pints) of cold water to make 1% strength solution. When stencils are difficult to remove use 5 litres of cold water to make a 2% strength solution. If an Automatic Stripping machine is used a 2% solution strength is preferred for a longer solution life.

Use of Autostrip Powder

1.Remove all ink residues by applying Autosolve Screen Wash to both sides of the mesh and work in with a brush.

2.Wash both sides of mesh with water to remove all solvent traces.

3.With a brush, apply Autostrip liberally to both sides of the mesh.

4.Leave to stand for 3 to 5 minutes while the emulsion coating dissolves. Do not allow Autostrip to dry onto the screen as this will make the stencil difficult to remove.

5.Wash off the stencil with a strong spray followed by a high pressure gun.

packing&shipping

Product detail pictures:

Related Product Guide:
Samsung Galaxy S10+ Takes Top Spot | Bolting Cloth For Screen Printing
ITMA 2015 Technology: Wet Processing | Textile Screen Printing Conveyor Dryer

We goal to see good quality disfigurement within the manufacturing and provide the most effective support to domestic and overseas shoppers wholeheartedly for Factory Free sample Conveyor Dryer For T Shirts - Emulsion remover for screen printing – Jiamei , The product will supply to all over the world, such as: Boston , Cairo , Porto , Our company now has many department, and there have more than 20 employees in our company. We set up sales shop, show room, and product warehouse. In the meantime, we registered our own brand. We have tightened inspection for quality of product.

Analog Tension Meter

Automatic Printer Machine

Nylon Screen Printing Mesh Fabric

Screen Printing Squeegee Handle

Silk Screen Printing Squeegee Polyurethane

Thin Air Filter Material

This is a reputable company, they have a high level of business management, good quality product and service, every cooperation is assured and delighted!

By Betsy from Mauritania - 2018.05.15 10:52

We have been engaged in this industry for many years, we appreciate the work attitude and production capacity of the company, this is a reputable and professional manufacturer.

By Elva from United Arab emirates - 2018.03.03 13:09

Write your message here and send it to us