Discountable price Rubber Squeegee Blades - Emulsion remover for screen printing – Jiamei

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We now have a highly efficient crew to deal with inquiries from clients. Our intention is "100% shopper pleasure by our merchandise quality, price tag & our staff service" and take pleasure in a very good standing amongst purchasers. With quite a few factories, we can easily provide a wide vary of Screen Printing Mesh Stretcher , Nylon Silk Screen Mesh , Auto Screen Printing Machine , "Quality", "honesty" and "service" is our principle. Our loyalty and commitments remain respectfully at your support. Call Us Today For even further info, get hold of us now.
Discountable price Rubber Squeegee Blades - Emulsion remover for screen printing – Jiamei Detail:

Screen printing emulsion remover powder
未标题-1

Product Description

pure Use ratio  Remarks
J.M.H-500 50% 1:100 1 kg of defilm powder mixed with 100kg of water
J.M.M-300 30% 1:65 1 kg of defilm powder mixed with 65kg of water
J.M.N-100 15% 1:45 1 kg of defilm powder mixed with 45kg of water

Feature

Save screen mesh.   /Easy to dissolve in water.   / Reduced the cost for the enterprise.  /Membrane cleaned off quickly and cleanly.

 With little damage to the environment.  / Aqueous solution can be long-term preservation.  / Low Price Hot Sale Screen Printing Photo Emulsion Remover

未标题-2

WORKING INSTRUCTIONS

Mixing of Autostrip Powder

For general use dissolve 100 grams in 10 litres (18 pints) of cold water to make 1% strength solution. When stencils are difficult to remove use 5 litres of cold water to make a 2% strength solution. If an Automatic Stripping machine is used a 2% solution strength is preferred for a longer solution life.

Use of Autostrip Powder

1.Remove all ink residues by applying Autosolve Screen Wash to both sides of the mesh and work in with a brush.

2.Wash both sides of mesh with water to remove all solvent traces.

3.With a brush, apply Autostrip liberally to both sides of the mesh.

4.Leave to stand for 3 to 5 minutes while the emulsion coating dissolves. Do not allow Autostrip to dry onto the screen as this will make the stencil difficult to remove.

5.Wash off the stencil with a strong spray followed by a high pressure gun.

packing&shipping

1

 


Product detail pictures:

Discountable price Rubber Squeegee Blades -
 Emulsion remover for screen printing  – Jiamei detail pictures


Related Product Guide:
Representing concepts of womanhood: Flux from Juju Papers | Flash Dryer Screen Printing
ITMA 2015 Technology: Wet Processing | Textile Screen Printing Conveyor Dryer

Our enterprise insists all along the standard policy of "product high-quality is base of business survival; client satisfaction could be the staring point and ending of an business; persistent improvement is eternal pursuit of staff" as well as consistent purpose of "reputation first, client first" for Discountable price Rubber Squeegee Blades - Emulsion remover for screen printing – Jiamei , The product will supply to all over the world, such as: Ottawa , London , Jersey , Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs. We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!
  • The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.
    5 Stars By Danny from Sri Lanka - 2017.11.11 11:41
    With a positive attitude of "regard the market, regard the custom, regard the science", the company works actively to do research and development. Hope we have a future business relationships and achieving mutual success.
    5 Stars By Judy from Tunisia - 2018.12.30 10:21
    Write your message here and send it to us