Chinese wholesale Dress Net Tulle Fabric Material - J.M. H-500 Emulsion remover for screen printing – Jiamei

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

To constantly improve the management system by virtue of the rule of "sincerely, good faith and quality are the base of enterprise development", we widely absorb the essence of related products internationally, and constantly develop new products to meet the demands of customers for Squeegee Handle , Blade Squeegee Rubber , Squeegee For Screen Printing , The main goal of our company would be to live a satisfactory memory to all of the shoppers, and establish a long term company romantic relationship with customers and users all around the entire world.
Chinese wholesale Dress Net Tulle Fabric Material - J.M. H-500 Emulsion remover for screen printing – Jiamei Detail:

Screen printing emulsion remover powder
未标题-1

Product Description

pure Use ratio  Remarks
J.M.H-500 50% 1:100 1 kg of defilm powder mixed with 100kg of water
J.M.M-300 30% 1:65 1 kg of defilm powder mixed with 65kg of water
J.M.N-100 15% 1:45 1 kg of defilm powder mixed with 45kg of water

Feature

Save screen mesh.   /Easy to dissolve in water.   / Reduced the cost for the enterprise.  /Membrane cleaned off quickly and cleanly.

 With little damage to the environment.  / Aqueous solution can be long-term preservation.  / Low Price Hot Sale Screen Printing Photo Emulsion Remover

未标题-2

WORKING INSTRUCTIONS

Mixing of Autostrip Powder

For general use dissolve 100 grams in 10 litres (18 pints) of cold water to make 1% strength solution. When stencils are difficult to remove use 5 litres of cold water to make a 2% strength solution. If an Automatic Stripping machine is used a 2% solution strength is preferred for a longer solution life.

Use of Autostrip Powder

1.Remove all ink residues by applying Autosolve Screen Wash to both sides of the mesh and work in with a brush.

2.Wash both sides of mesh with water to remove all solvent traces.

3.With a brush, apply Autostrip liberally to both sides of the mesh.

4.Leave to stand for 3 to 5 minutes while the emulsion coating dissolves. Do not allow Autostrip to dry onto the screen as this will make the stencil difficult to remove.

5.Wash off the stencil with a strong spray followed by a high pressure gun.

packing&shipping

1

 


Product detail pictures:

Chinese wholesale Dress Net Tulle Fabric Material -
 J.M. H-500 Emulsion remover for screen printing  – Jiamei detail pictures


Related Product Guide:
Texo Trade Services premieres two textiles at Fespa | Flash Dryer Screen Printing
The 20 Best DVDs and Blu-rays of 2015 | Bolting Cloth For Screen Printing

Good quality comes initial; company is foremost; small business is cooperation" is our business philosophy which is frequently observed and pursued by our business for Chinese wholesale Dress Net Tulle Fabric Material - J.M. H-500 Emulsion remover for screen printing – Jiamei , The product will supply to all over the world, such as: Angola , Israel , Belgium , Further, we are supported by highly experienced and knowledgeable professionals, who have immense expertise in their respective domain. These professionals work in close coordination with each other to offer our clients an effective range of products.
  • Wide range, good quality, reasonable prices and good service, advanced equipment, excellent talents and continuously strengthened technology forces,a nice business partner.
    5 Stars By Kristin from Tanzania - 2018.06.28 19:27
    It is a very good, very rare business partners, looking forward to the next more perfect cooperation!
    5 Stars By Catherine from Venezuela - 2017.10.13 10:47
    Write your message here and send it to us