China China Supplier Monofilament Screen Printing Mesh - Stainless steel emulsion scoop coater – Jiamei factory and manufacturers

China Supplier Monofilament Screen Printing Mesh - Stainless steel emulsion scoop coater – Jiamei

Short Description:

Product Detail

Product Tags

Feedback (2)

Adhering into the theory of "quality, services, efficiency and growth", now we have gained trusts and praises from domestic and international shopper for Polyester Stretch Mesh , Manual Cylindrical Screen Printing Machine , Silk Screen Printing Squeegee Rubber , Safety as a result of innovation is our promise to each other.

China Supplier Monofilament Screen Printing Mesh - Stainless steel emulsion scoop coater – Jiamei Detail:

Product Specification

It is usually best to get an emulsion scoop coater about 2-3 inches narrower than the inside screen frame width.

14 Inch	OD18″ ×20″ screens
16 Inch	OD20″×24″ screens
18 Inch	OD 23″×31″ screens
20 Inch	OD25″×36″ screens

Product Feature

Easy and comfortable handing.

Easy to cleanup.

Holds more emulsion , Less time refilling & More screens coated,

Chemical-resistant due to its Oxidation surface.

Each side can be used in emulsion coating process with different thickness.

Included with the coater is injection molded ends with a full snap-on dust shield to prevent any particles from mixing in with your emulsion.

Size can be customized according to customer demand

HOW TO USE & CLEAN UP

FILL THE COATER: Under a safe yellow light source, pour emulsion from its container . Allow the emulsion to flow out to an even level. Make sure you have enough to coat in one stroke.

COAT THE SCREEN: Use the rounded edge of a scoop coater to apply an even coat of emulsion in one pass. The coater should be at least two inches shorter that the narrow width of your screen. Apply one coat of emulsion to the printing side, then one coat on the squeegee side. Dry the screen thoroughly.

CLEAN THE COATER: Scrape extra emulsion back into its container. Cover the container. Wash out remaining emulsion with water. Any remaining emulsion that dries in the coater can be very difficult to remove. Store the coater where the edged can’t be nicked.

Packing&Shipping

Product detail pictures:

Related Product Guide:
ITMA 2015 Technology: Wet Processing | Textile Screen Printing Conveyor Dryer
Talking Cars #202: Tires, Wheel Sizes & Oil Changes | 100% Polyester Screen Printing

we can easily offer you high-quality products and solutions, competitive rate and very best shopper support. Our destination is "You come here with difficulty and we give you a smile to take away" for China Supplier Monofilament Screen Printing Mesh - Stainless steel emulsion scoop coater – Jiamei , The product will supply to all over the world, such as: Argentina , Greek , New Zealand , With more and more Chinese products around the world, our international business is developing rapidly and economic indicators big increase year by year. We have enough confidence to offer you both better products and service, because we are more and more powerful, professional and experience in domestic and international.

100% Polyester Screen Printing Mesh

20x24 Frame

Screen Printing Squeegee Rubber

Silk Screen Fabric For Printing Machine

Stainless Steel Printing Mesh

Urethane Squeegee Blade

The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!