China Gold Supplier for Screen Squeegee Rubber - Aluminum emulsion scoop coater – Jiamei

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Now we have superior devices. Our solutions are exported to your USA, the UK and so on, enjoying a superb name between customers for Printing Machines Screen , 50x9 Durometer Squeegee , Silk Screen Printing Aluminum Frames , We sincerely look forward to hearing from you. Give us a opportunity to show you our professionalism and enthusiasm. We have been sincerely welcome excellent friends from numerous circles at dwelling and overseas occur to cooperate!
China Gold Supplier for Screen Squeegee Rubber - Aluminum emulsion scoop coater – Jiamei Detail:

Aluminum emulsion scoop coater

Emulsion scoop coater is a necessary tool for coating screens with all direct liquid emulsions.
made of durable aluminum alloy with plastic end cap guides, it will give you a nice even coat when applied with this emulsion scoop coater. Designed for easy grip, application, and cleanup.
Also easy to hold, sit easily on flat surface between coats
Aluminum emulsion scoop coater,used for load and scrap emulsion,Large capacity design to ensure more emulsion can be loaded.Can be used for wide frame and precision printing.
V shape aluminum emulsion scoop coater,a total new design,more emulsion can be loaded, good handling,easy to operation,can be used both two side.
a sharp edge for thin coats on higher mesh screens, and a rounded dull edge for coating lower mesh screens or for coating heat transfers. They hold a good amount of emulsion for lengthy coating sessions.    
Choose the right Size :
It is usually best to get an emulsion scoop coater about 2-3 inches narrower than the inside screen frame width.
14 Inch –OD18″ ×20″ screens.
16 Inch –OD20″×24″ screens .
18 Inch –OD 23″×31″ screens.
20 Inch –OD25″×36″ screens.
Feature:

  1. Easy and comfortable handing.
  2. Easy to cleanup.
  3. Holds more emulsion , Less time refilling & More screens coated,

4. Chemical-resistant due to its Oxidation surface.
5.Each side can be used in emulsion coating process with different thickness.
6.Included with the coater is injection molded ends with a full snap-on dust shield to prevent any particles from mixing in with your emulsion.
7.Size can be customized according to customer demand  

HOW TO USE & CLEAN UP:

FILL THE COATER: Under a safe yellow light source, pour emulsion from its container . Allow the emulsion to flow out to an even level. Make sure you have enough to coat in one stroke.
COAT THE SCREEN: Use the rounded edge of a scoop coater to apply an even coat of emulsion in one pass. The coater should be at least two inches shorter that the narrow width of your screen. Apply one coat of emulsion to the printing side, then one coat on the squeegee side. Dry the screen thoroughly.
CLEAN THE COATER: 
Scrape extra emulsion back into its container. Cover the container. Wash out remaining emulsion with water. Any remaining emulsion that dries in the coater can be very difficult to remove. Store the coater where the edged can’t be nicked.

Application:

图片2


Product detail pictures:

China Gold Supplier for Screen Squeegee Rubber -
 Aluminum emulsion scoop coater – Jiamei detail pictures

China Gold Supplier for Screen Squeegee Rubber -
 Aluminum emulsion scoop coater – Jiamei detail pictures

China Gold Supplier for Screen Squeegee Rubber -
 Aluminum emulsion scoop coater – Jiamei detail pictures

China Gold Supplier for Screen Squeegee Rubber -
 Aluminum emulsion scoop coater – Jiamei detail pictures

China Gold Supplier for Screen Squeegee Rubber -
 Aluminum emulsion scoop coater – Jiamei detail pictures


Related Product Guide:
All-New 2020 Hyundai Palisade Preview | Printing Squeegees
Samsung Galaxy S10+ Takes Top Spot | Flash Dryer Screen Printing

To continuously increase the administration process by virtue of the rule of "sincerely, good religion and excellent are the base of company development", we commonly absorb the essence of linked goods internationally, and continually build new solutions to fulfill the requires of shoppers for China Gold Supplier for Screen Squeegee Rubber - Aluminum emulsion scoop coater – Jiamei , The product will supply to all over the world, such as: Sheffield , Venezuela , Bolivia , Our company covers an area of 20, 000 square meters. We have more than 200 workers, professional technical team, 15 years' experience, exquisite workmanship, stable and reliable quality, competitive price and sufficient production capacity, this is how we make our customers stronger. If you have any inquiry, please do not hesitate to contact us.
  • It is a very good, very rare business partners, looking forward to the next more perfect cooperation!
    5 Stars By Anna from Colombia - 2018.11.28 16:25
    In general, we are satisfied with all aspects, cheap, high-quality, fast delivery and good procuct style, we will have follow-up cooperation!
    5 Stars By Leona from Greek - 2017.01.11 17:15
    Write your message here and send it to us