We usually think and practice corresponding for the change of circumstance, and grow up. We aim at the achievement of a richer mind and body as well as the living for
Silk Cylindrical Round Screen Printer
, Manual Cylindrical Screen Printing Machine
, Analog Tension Meter
, We are trying to get for in depth cooperation with sincere shoppers, attaining a new result in of glory with customers and strategic partners.
100% Original Screen Printing Mesh Cloth -
Aluminum emulsion scoop coater – Jiamei Detail:

Product Specification
It is usually best to get an emulsion scoop coater about 2-3 inches narrower than the inside screen frame width.
14 Inch |
OD18″ ×20″ screens |
16 Inch |
OD20″×24″ screens |
18 Inch |
OD 23″×31″ screens |
20 Inch |
OD25″×36″ screens |
Product Feature
Easy and comfortable handing.
Easy to cleanup.
Holds more emulsion , Less time refilling & More screens coated,
Chemical-resistant due to its Oxidation surface.
Each side can be used in emulsion coating process with different thickness.
Included with the coater is injection molded ends with a full snap-on dust shield to prevent any particles from mixing in with your emulsion.
Size can be customized according to customer demand
HOW TO USE & CLEAN UP
FILL THE COATER: Under a safe yellow light source, pour emulsion from its container . Allow the emulsion to flow out to an even level. Make sure you have enough to coat in one stroke.
COAT THE SCREEN: Use the rounded edge of a scoop coater to apply an even coat of emulsion in one pass. The coater should be at least two inches shorter that the narrow width of your screen. Apply one coat of emulsion to the printing side, then one coat on the squeegee side. Dry the screen thoroughly.
CLEAN THE COATER: Scrape extra emulsion back into its container. Cover the container. Wash out remaining emulsion with water. Any remaining emulsion that dries in the coater can be very difficult to remove. Store the coater where the edged can’t be nicked.
Packing&Shipping

Product detail pictures:
Related Product Guide:
Bradford, Wyoming Counties Drying Out After Flooding | Printing Squeegees
High-Wire Acts: Adventures at the 2014 SGIA Expo (Part 1) | Printing Squeegees
Our company puts emphasis on the management, the introduction of talented personnel, and the construction of staff building, trying hard to improve the quality and liability consciousness of staff members. Our company successfully attained IS9001 Certification and European CE Certification of
100% Original Screen Printing Mesh Cloth -
Aluminum emulsion scoop coater – Jiamei , The product will supply to all over the world, such as: Serbia
, Russia
, Hungary
, Our company has already have pass the ISO standard and we're fully respect our customer 's patents and copyrights. If the customer provides their own designs, We will guarantee that they will likely be the only one can have that merchandise. We hoping that with our good products can bring our customers a great fortune.